The Issue(https://i.imgur.com/LWbHyOw.jpg)
Monitor is Dell SP2309W, GPU is AMD RX 6700 XT, Cable is HDMI to HDMI
I installed the GPU yesterday, since then it will not display on my monitor because of the refresh rate, it will black screen, glitch screen or struggle to display
I used DDU by Guru3D(https://www.guru3d.com/files-details/dis...nload.html) and I believe when it uninstalled my monitor(https://i.imgur.com/H0s4plQ.jpg) the issue began and my monitor is replaced with a basic driver that can not communicate what refresh rate it can support
I am trying to find drivers for my monitor Dell SP2309W but nothing worked so far, prior to this situation it would say DELL SP2309W in Devices and Printers(https://i.imgur.com/UhDWPVg.png) and under Monitor in Device Manager(https://i.imgur.com/1R9sJ7W.png), it no longer does and has been replaced by what Windows has found
My old TV can display without an issue(https://i.imgur.com/hgg0rua.jpg)
If the GPU drivers are uninstalled or I boot in Safe Mode(https://i.imgur.com/EBvXkIn.png), it will display on the monitor, while in Safe Mode it thinks my monitor is still the old TV(https://i.imgur.com/o3rHPuR.jpg)
I tried lowering the resolution, did not help
A little digging shows the generic driver is at 64 Hertz(https://i.imgur.com/5vISDiA.jpg) with no other options available, which exceeds my monitor limitation of 2048x1152@60Hz
https://i.imgur.com/oDybO1h.png
Please help!
EDIT: I was able to install the drivers for my monitor Dell SP2309W, it is now being recognized for what it is
According to the DirectX Diagnostic Tool, Microsoft Basic Display Driver(https://i.imgur.com/3YKk3lM.png) is forcing the 64Hz on my monitor, which it can not handle, I don't know how I can change this
EDIT 2: When the HDMI is connected to the TV, it is connected to the AMD RX 6700 XT, when the HDMI is connected to the monitor, it is connect to the Microsoft Basic Display Driver, confirmed this in Safe Mode where my monitor works at 1Hz
Monitor is Dell SP2309W, GPU is AMD RX 6700 XT, Cable is HDMI to HDMI
I installed the GPU yesterday, since then it will not display on my monitor because of the refresh rate, it will black screen, glitch screen or struggle to display
I used DDU by Guru3D(https://www.guru3d.com/files-details/dis...nload.html) and I believe when it uninstalled my monitor(https://i.imgur.com/H0s4plQ.jpg) the issue began and my monitor is replaced with a basic driver that can not communicate what refresh rate it can support
I am trying to find drivers for my monitor Dell SP2309W but nothing worked so far, prior to this situation it would say DELL SP2309W in Devices and Printers(https://i.imgur.com/UhDWPVg.png) and under Monitor in Device Manager(https://i.imgur.com/1R9sJ7W.png), it no longer does and has been replaced by what Windows has found
My old TV can display without an issue(https://i.imgur.com/hgg0rua.jpg)
If the GPU drivers are uninstalled or I boot in Safe Mode(https://i.imgur.com/EBvXkIn.png), it will display on the monitor, while in Safe Mode it thinks my monitor is still the old TV(https://i.imgur.com/o3rHPuR.jpg)
I tried lowering the resolution, did not help
A little digging shows the generic driver is at 64 Hertz(https://i.imgur.com/5vISDiA.jpg) with no other options available, which exceeds my monitor limitation of 2048x1152@60Hz
https://i.imgur.com/oDybO1h.png
Please help!
EDIT: I was able to install the drivers for my monitor Dell SP2309W, it is now being recognized for what it is
According to the DirectX Diagnostic Tool, Microsoft Basic Display Driver(https://i.imgur.com/3YKk3lM.png) is forcing the 64Hz on my monitor, which it can not handle, I don't know how I can change this
EDIT 2: When the HDMI is connected to the TV, it is connected to the AMD RX 6700 XT, when the HDMI is connected to the monitor, it is connect to the Microsoft Basic Display Driver, confirmed this in Safe Mode where my monitor works at 1Hz